Home > Logic Output Optoisolators >

diode transistor optocoupler Broadcom HCPL 050L 500E with high speed and common mode transient immunity

Product Categories

Digital Isolators [228]
Isolators - Gate Drivers [194]
Logic Output Optoisolators [243]
Transistor, Photovoltaic Output Optoisolators [647]
Special Purpose Isolators [2]
Triac, SCR Output Optoisolators [463]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

diode transistor optocoupler Broadcom HCPL 050L 500E with high speed and common mode transient immunity

Power Dissipation : 100mW

Output Current : 8mA

Low Level Delay Time : 650ns

High Level Delay Time : 350ns

Reverse Voltage : 5V

Voltage - Forward(Vf) : 1.7V

Current transfer ratio : 15%

Voltage - Supply : 2.7V~7V

Forward Current(If) : 20mA

Operating Temperature : -55℃~+100℃

CMTI(kV/us) : 1kV/us

Number of Channels : 1

Input threshold current : -

Isolation Voltage(Vrms) : 3.75kV

Input Type : DC

Description : 8mA 5V 1.7V 2.7V~7V DC SOP-8 Logic Output Optoisolators RoHS

Mfr. Part # : HCPL-050L-500E

Model Number : HCPL-050L-500E

Package : SOP-8

Contact Now

Product Overview

These diode-transistor optocouplers provide electrical insulation between input and output using an internal insulating layer between a LED and a photodetector. Enhanced speed, up to a hundred times that of conventional photo-transistor couplers, is achieved by reducing base-collector capacitance through separate photodiode bias and output-transistor collector connections. Available in 8-pin DIP and SO-8 packages, these optocouplers offer low power consumption and are compatible with LVTTL/LVCMOS or wide bandwidth analog applications. They boast a minimum common mode transient immunity of 1000 V/s. Key applications include high voltage insulation, video signal isolation, power translator isolation in motor drives, line receivers, feedback elements in switched mode power supplies, high-speed logic ground isolation, and as replacements for pulse transformers and slow phototransistor isolators.

Product Attributes

Brand: Avago Technologies
Certifications: UL Recognized (UL1577), CSA Component Acceptance Notice #5, IEC/EN/DIN EN 60747-5-2
Package Types: 8-pin DIP, SO-8
Lead Free Options Available
RoHS 6 fully compliant options available

Technical Specifications

Model	Package Type	Description	Supply Voltage (VCC)	Data Rate	Common Mode Transient Immunity (Min)	Operating Temperature	Safety Approval
HCPL-250L	8-pin DIP	LVTTL/LVCMOS Compatible	3.3V / 5V	1 Mb/s	1000 V/s	0C to +70C	UL, CSA, IEC/EN/DIN EN 60747-5-2
HCPL-050L	SO-8	LVTTL/LVCMOS Compatible	3.3V / 5V	1 Mb/s	1000 V/s	0C to +70C	UL, CSA, IEC/EN/DIN EN 60747-5-2
HCPL-253L	8-pin DIP	LVTTL/LVCMOS Compatible	3.3V / 5V	1 Mb/s	1000 V/s	0C to +70C	UL, CSA, IEC/EN/DIN EN 60747-5-2
HCPL-053L	SO-8	LVTTL/LVCMOS Compatible	3.3V / 5V	1 Mb/s	1000 V/s	0C to +70C	UL, CSA, IEC/EN/DIN EN 60747-5-2
Electrical Specifications (DC) Over Recommended Temperature (TA = 0C to +70C), VCC = 3.3 V, IF = 16 mA
Parameter	Device	Min	Typ.	Max	Units	Test Conditions	Note
Current Transfer Ratio (CTR)	All	15	20-50	50	%	TA = 25C, VO = 0.4 V, IF = 16 mA, VCC = 3.3 V	5, 11
Logic Low Output Voltage (VOL)	All	0.05	0.3	0.3	V	TA = 25C, IO = 3.0 mA, IF = 16 mA, VCC = 3.3 V
Logic High Output Current (IOH)	All	0.003		1	A	TA = 25C, VO = VCC = 3.3 V, IF = 0 mA
Input Forward Voltage (VF)	All	1.52	1.7		V	TA = 25C, IF = 16 mA
Switching Specifications (AC) Over Recommended Temperature (TA = 0C to +70C), VCC = 3.3 V, IF = 16 mA
Parameter	Device	Min	Typ.*	Max	Units	Test Conditions	Note
Propagation Delay Time to Logic Low (tPHL)	All	0.35		1	s	RL = 1.9 k, VCM = 10 Vp-p	8, 9
Propagation Delay Time to Logic High (tPLH)	All	0.65		1	s	RL = 1.9 k, VCM = 10 Vp-p	8, 9
Common Mode Transient Immunity (CMH)	All	1			kV/s	RL = 4.1 k, IF = 0 mA, TA = 25C, VCM = 10 Vp-p, CL = 15 pF	7, 8, 9
Common Mode Transient Immunity (CML)	All	1			kV/s	RL = 4.1 k, IF = 16 mA, TA = 25C, VCM = 10 Vp-p, CL = 15 pF	7, 8, 9
Package Characteristics
Parameter	Device	Min	Typ.*	Max	Units	Test Conditions	Note
Input-Output Withstand Voltage (VISO)	8-Pin DIP	3750			V rms	t = 1 min., RH < 50%, TA = 25C	**
Input-Output Withstand Voltage (VISO)	SO-8	3750			V rms	t = 1 min., RH < 50%, TA = 25C	**
Input-Output Resistance (RI-O)	8-Pin DIP	10¹²				VI-O = 500 Vdc
Input-Output Capacitance (CI-O)	8-Pin DIP		0.6		pF	f = 1 MHz

**The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics Table (if applicable), your equipment level safety specification or Avago Application Note 1074 entitled "Optocoupler Input-Output Endurance Voltage," publication number 5963-2203E.

2409291833_Broadcom-HCPL-050L-500E_C692011.pdf

Quality diode transistor optocoupler Broadcom HCPL 050L 500E with high speed and common mode transient immunity for sale

diode transistor optocoupler Broadcom HCPL 050L 500E with high speed and common mode transient immunity Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!