Home > Transistor, Photovoltaic Output Optoisolators >

High gain optocoupler Broadcom 6N139-000E with TTL compatible saturation voltage and high speed operation

Product Categories

Digital Isolators [228]
Isolators - Gate Drivers [194]
Logic Output Optoisolators [243]
Transistor, Photovoltaic Output Optoisolators [647]
Special Purpose Isolators [2]
Triac, SCR Output Optoisolators [463]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High gain optocoupler Broadcom 6N139-000E with TTL compatible saturation voltage and high speed operation

Output Current : 60mA

Vce Saturation(VCE(sat)) : 400mV@0.5mA,2mA

Operating Temperature : 0℃~+70℃

Load Voltage : 18V

Reverse Voltage : 5V

Load Type : Darlington Transistor

Current transfer ratio : 5000%;400%

Forward Current(If) : 0.5mA

Input type : DC

Isolation Voltage(Vrms) : 3.75kV

Pd - Power Dissipation : 135mW

Number of Channels : 1

Description : 60mA 400mV@0.5mA,2mA 18V 5V DC DIP-8 Transistor, Photovoltaic Output Optoisolators RoHS

Mfr. Part # : 6N139-000E

Model Number : 6N139-000E

Package : DIP-8

Contact Now

Product Overview

The HCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, and 6N138 are high gain optocouplers designed for efficient current transfer between input and output. These devices utilize a Light Emitting Diode and an integrated high gain photodetector, offering TTL-compatible saturation voltages and high-speed operation. Separate pins for the photodiode and output stage allow for flexible configuration. The 6N139, HCPL-0701, and HCNW139 are optimized for CMOS, LSTTL, or other low-power applications, guaranteeing a minimum 400% current transfer ratio (CTR) over a 0 to 70C range with only 0.5 mA of LED current. The 6N138, HCPL-0700, and HCNW138 are designed for TTL applications, providing a minimum 300% CTR at 1.6 mA LED current. These optocouplers are suitable for applications requiring ground isolation, low input current line reception, high voltage insulation, and status indication in various logic families and line voltage monitoring.

Product Attributes

Brand: Avago Technologies
Certifications: UL Recognized, CSA Approved, IEC/EN/DIN EN 60747-5-5 approved (HCNW139/138 and specific options)
Compliance: RoHS 6 fully compliant options available
Material Group: Material Group IIIa (DIN VDE 0110, 1/89, Table 1)

Technical Specifications

Model	Package Type	Minimum Input ON Current (IF)	Minimum CTR	Maximum VCC	UL 5000 Vrms/1 Minute Rating	IEC/EN/DIN EN 60747-5-5
6N139, HCPL-0701, HCNW139	8-Pin DIP (300 Mil), SO-8, Widebody (400 mil)	0.5 mA	400%	18 V	N/A	N/A
6N138, HCPL-0700, HCNW138	8-Pin DIP (300 Mil), SO-8, Widebody (400 mil)	1.6 mA	300%	7 V	N/A	N/A
HCPL-4701, HCPL-4731, HCPL-070A, HCPL-073A	N/A	40 A	800%	18 V	N/A	N/A
HCPL-5701, HCPL-5700, HCPL-5731, HCPL-5730	Hermetic	0.5 mA	300%	20 V	N/A	N/A

Parameter	Symbol	8-Pin DIP (300 Mil)	SO-8	Widebody (400 Mil)	Units	Conditions
Minimum External Air Gap (External Clearance)	L(101)	7.1	4.9	9.6	mm	Measured from input terminals to output terminals, shortest distance through air.
Minimum External Tracking (External Creepage)	L(102)	7.4	4.8	10.0	mm	Measured from input terminals to output terminals, shortest distance path along body.
Minimum Internal Plastic Gap (Internal Clearance)		0.08	0.08	1.0	mm	Through insulation distance, conductor to conductor.
Tracking Resistance (Comparative Tracking Index)	CTI	200	200	200	Volts	DIN IEC 112/VDE 0303 Part 1
Input-Output Momentary Withstand Voltage	VISO	3750	N/A	N/A	V rms	RH < 50%, t = 1 min., TA = 25C
Input-Output Momentary Withstand Voltage (Option 020)	VISO	N/A	N/A	5000	V rms	RH < 50%, t = 1 min., TA = 25C
Storage Temperature	TS	-55 to 125			C
Operating Temperature	TA	-40 to 85			C	(0C to 70C on JEDEC Registration)
Average Forward Input Current	IF(AVG)	20			mA
Peak Forward Input Current (50% Duty Cycle, 1 ms Pulse Width)	IFPK	40			mA
Reverse Input Voltage	VR	5	N/A	3	V	(HCNW139/138)
Input Power Dissipation	PI	35			mW
Output Current (Pin 6)	IO	60			mA
Supply Voltage and Output Voltage (6N139, HCPL-0701, HCNW139)	VCC	-0.5 to 18			V
Supply Voltage and Output Voltage (6N138, HCPL-0700, HCNW138)	VCC	-0.5 to 7			V
Output Power Dissipation	PO	100			mW
Total Power Dissipation	PT	135			mW
Power Supply Voltage	VCC	4.5	18	V
Forward Input Current (ON)	IF(ON)	0.5	12.0	mA
Forward Input Voltage (OFF)	VF(OFF)	0	0.8	V
Current Transfer Ratio (CTR)	CTR	400* - 5000	400 - 4500	300* - 2600	%	IF = 0.5 mA to 12 mA, VCC = 4.5 V, VO = 0.4 V
Logic Low Output Voltage	VOL	0.1 - 0.2	0.1	V	IF = 0.5 mA to 12 mA, IO = 2 mA to 24 mA
Logic High Output Current	IOH	0.05 - 0.1	100 - 250	A	VO = VCC = 18 V (7 V for HCNW138), IF = 0 mA
Propagation Delay Time to Logic Low	tPHL	5 - 15	1.6 - 15	s	IF = 0.5 mA to 1.6 mA, Rl = 4.7 k to 2.2 k
Propagation Delay Time to Logic High	tPLH	18 - 50	2 - 50	s	IF = 0.5 mA to 1.6 mA, Rl = 4.7 k to 2.2 k
Common Mode Transient Immunity at Logic High Output	\|CMH\|	1000 - 10000			V/s	IF = 0 mA, Rl = 2.2 k, \|VCM\| = 10 Vp-p
Common Mode Transient Immunity at Logic Low Output	\|CML\|	1000 - 10000			V/s	IF = 1.6 mA, Rl = 2.2 k, \|VCM\| = 10 Vp-p

2410121720_Broadcom-6N139-000E_C691909.pdf

Quality High gain optocoupler Broadcom 6N139-000E with TTL compatible saturation voltage and high speed operation for sale

High gain optocoupler Broadcom 6N139-000E with TTL compatible saturation voltage and high speed operation Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!