| Maximum Peak Output Current | 0.6 A | |
| Minimum Peak Output Current | 0.4 A | |
| Propagation Delay | 0.7 s max. | Over temperature range |
| Common-Mode Rejection (CMR) | 25 kV/s min. | at VCM = 1.5 kV |
| Bootstrappable Supply Current | 3 mA max. | |
| Operating Temperature Range | -40C to 100C | |
| VCC Operating Range | 10 V to 30 V | Over temperature range |
| Package Types | DIP8 (single), SO16 (dual) | HCPL-J314 (single), HCPL-314J (dual) |
| Safety Approvals | UL Recognized, CSA Approval, IEC/EN/DIN EN 60747-5-2 Approval | 3750 Vrms for 1 minute (UL) |
| Maximum Working Insulation Voltage (VIORM) | 891 Vpeak | |
| Input to Output Test Voltage (VPR) | 1670 Vpeak | 100% Production Test, tm = 1 sec |
| Highest Allowable Overvoltage (VIOTM) | 6000 Vpeak | tini = 10 sec |
| Safety-Limiting Case Temperature (TS) | 175 C | Maximum allowed in event of failure |
| Safety-Limiting Input Current (IS,INPUT) | 400 mA | Maximum allowed in event of failure |
| Safety-Limiting Output Power (PS, OUTPUT) | 1200 mW | Maximum allowed in event of failure |
| Insulation Resistance (RI-O) | >1012 | VI-O = 500 V |
| External Air Gap (L(101)) | 7.4 mm min. | Clearance |
| External Tracking (L(102)) | 8.0 mm min. | Creepage |
| Internal Plastic Gap | 0.5 mm | Through insulation distance |
| Tracking Resistance (CTI) | >175 V | DIN IEC 112/VDE 0303 Part 1 |
| Material Group | IIIa | DIN VDE 0110, 1/89, Table 1 |
| Storage Temperature | -55C to 125C | |
| Average Input Current (IF(AVG)) | 25 mA | |
| Peak Transient Input Current (IF(TRAN)) | 1.0 A | <1 s pulse width, 300pps |
| Reverse Input Voltage (VR) | 5 V | |
| High Level Output Current (IOH(PEAK)) | 0.6 A | |
| Low Level Output Current (IOL(PEAK)) | 0.6 A | |
| Supply Voltage (VCC - VEE) | -0.5 V to 35 V | |
| Output Voltage (VO(PEAK)) | -0.5 V to VCC | |
| Output Power Dissipation (PO) | 260 mW | |
| Input Power Dissipation (PI) | 105 mW | |
| Power Supply (VCC - VEE) | 10 V to 30 V | Recommended Operating |
| Input Current (ON) (IF(ON)) | 8 mA to 12 mA | Recommended Operating |
| Input Voltage (OFF) (VF(OFF)) | -3.6 V to 0.8 V | Recommended Operating |
| High Level Output Current (IOH) | 0.2 A to 0.4 A | VO = VCC 4V or VCC 10V |
| Low Level Output Current (IOL) | 0.2 A to 0.5 A | VO = VEE + 2.5V or VEE + 10V |
| High Level Output Voltage (VOH) | VCC-4 V to VCC-1.8 V | IO = -100 mA |
| Low Level Output Voltage (VOL) | 0.4 V to 1 V | IO = 100 mA |
| High Level Supply Current (ICCH) | 0.7 mA to 3 mA | IO = 0 mA |
| Low Level Supply Current (ICCL) | 1.2 mA to 3 mA | IO = 0 mA |
| Threshold Input Current Low to High (IFLH) | 6 mA | IO = 0 mA |
| Threshold Input Voltage Low to High (VFHL) | 0.8 V | VO > 5 V |
| Input Forward Voltage (VF) | 1.2 V to 1.8 V | IF = 10 mA |
| Temperature Coefficient of Input (DVF/DTA) | -1.6 mV/C | |
| Input Reverse Breakdown Voltage (BVR) | 5 V | IR = 10 A |
| Input Capacitance (CIN) | 60 pF | f = 1 MHz, VF = 0 V |
| Input-Output Momentary Withstand Voltage (VISO) | 3750 Vrms | TA = 25C, RH < 50% for 1 min. |
| Output-Output Momentary Withstand Voltage (VO-O) | 1500 Vrms | |
| Propagation Delay Time to High Output (tPLH) | 0.1 s to 0.7 s | Rg = 47 , Cg = 3 nF, IF = 8 mA, 10 kHz, 50% Duty Cycle |
| Propagation Delay Time to Low Output (tPHL) | 0.1 s to 0.7 s | Rg = 47 , Cg = 3 nF, IF = 8 mA, 10 kHz, 50% Duty Cycle |
| Propagation Delay Difference (PDD) | -0.5 s to 0.5 s | Between Any Two Parts or Channels |
| Rise Time (tR) | 50 ns | |
| Fall Time (tF) | 50 ns | |
| Output High Level Common Mode Transient Immunity (|CMH|) | 25 kV/s to 35 kV/s | TA = 25C, VCM = 1.5 kV |
| Output Low Level Common Mode Transient Immunity (|CML|) | 25 kV/s to 35 kV/s | |
