| 6N137 | 15 (for HCNW2611, HCPL-2611, HCPL-4661, HCPL-0611, HCPL-0661) | 10 | 5 | Yes | 6N137 | | | |
| HCPL-26xx/06xx/4661 | 15 (for HCNW2611, HCPL-2611, HCPL-4661, HCPL-0611, HCPL-0661) | 10 | 5 | Yes (Single Channel) | HCPL-2601, HCPL-2611, HCPL-2630, HCPL-2631 | HCPL-0600, HCPL-0601, HCPL-0611, HCPL-0630, HCPL-0631, HCPL-0661 | | (HCPL-56xx/66xx) |
| HCNW137/26x1 | 15 (for HCNW2611, HCPL-2611, HCPL-4661, HCPL-0611, HCPL-0661) | 10 | 5 | No | | | HCNW137, HCNW2601, HCNW2611 | |
| Common Features | 15 kV/s minimum CMR at VCM=1 kV (for specific models) | 10 MBd typical | 5 mA low input current capability | Strobable output (single channel products only) | Available | Available | Available | Available (HCPL-56xx/66xx) |
| Temperature Range | Guaranteed AC and DC performance over industrial temperature: 40C to +85C |
| Safety Approval Ratings | - UL recognized: 3750 Vrms for 1 minute (HCPL-xxxx)
- UL recognized: 5000 Vrms for 1 minute (HCNWxxxx, specific HCPL-xxxx options)
- CSA approved: 5000 Vrms/1 Minute
- IEC/EN/DIN EN 60747-5-5 approved (VIORM values vary by model)
|
| Absolute Maximum Ratings (TA = 85C) | - Storage Temperature: 55C to 125C
- Operating Temperature: 40C to 85C
- Reverse Input Voltage (8-Pin DIP, SO-8): 5V
- Reverse Input Voltage (Widebody): 3V
- Supply Voltage: 7V
- Output Collector Current: 50mA
- Output Collector Voltage: 7V
|
| Recommended Operating Conditions | - Input Current, Low Level (IFL): 0 to 250 A
- Input Current, High Level (IFH): 5 to 15 mA
- Power Supply Voltage (VCC): 4.5V to 5.5V
- Output Pull-up Resistor (RL): 330 to 4 k
|
| Switching Specifications | - Propagation Delay High Output (tPLH): 20 to 75 ns typical
- Propagation Delay Low Output (tPHL): 25 to 75 ns typical
- Pulse Width Distortion: 3.5 to 40 ns typical
- Propagation Delay Skew (tPSK): Up to 40 ns typical
- Output Rise Time (tr): 24 ns typical
- Output Fall Time (tf): 10 ns typical
|
| Common Mode Transient Immunity (CMTI) | - Logic High: 1,000 to 15,000 V/s typical
- Logic Low: 1,000 to 15,000 V/s typical
|
