| Maximum Peak Output Current | 5.0 | A | |
| Minimum Common Mode Rejection (CMR) | 15 | kV/s | at VCM = 1500 V |
| Maximum Low Level Output Voltage (VOL) | 0.5 | V | |
| Maximum Supply Current (ICC) | 5 | mA | |
| Under Voltage Lock-Out Protection (UVLO) | Included with Hysteresis |
| Wide Operating VCC Range | 15 to 30 | Volts | |
| Maximum Switching Speeds | 500 | ns | |
| Industrial Temperature Range | -40 to 100 | C | |
| Input-Output Test Voltage (IEC/EN/DIN EN 60747-5-2, Method b) | 2652 | Vpeak | 100% Production Test, tm=1 sec, Partial discharge < 5 pC |
| Input-Output Test Voltage (IEC/EN/DIN EN 60747-5-2, Method a) | 2121 | Vpeak | Type and Sample Test, tm=60 sec, Partial discharge < 5 pC |
| Highest Allowable Overvoltage (VIOTM) | 8000 | Vpeak | tini = 10 sec |
| Insulation Resistance (at TS, VIO = 500 V) | 109 | | |
| Minimum External Air Gap (Clearance) L(101) | 9.6 | mm | |
| Minimum External Tracking (Creepage) L(102) | 10.0 | mm | |
| Minimum Internal Plastic Gap (Internal Clearance) | 1.0 | mm | |
| Tracking Resistance (CTI) | >200 | V | DIN IEC 112/VDE 0303 Part 1 |
| Storage Temperature | -55 to 125 | C | |
| Operating Temperature | -40 to 100 | C | |
| Output IC Junction Temperature | 150 | C | |
| Average Input Current | 25 | mA | |
| Peak Transient Input Current | 1.0 | A | <1 s pulse width, 300pps |
| Reverse Input Voltage | 5 | V | |
| Total Output Supply Voltage (VCC - VEE) | -0.5 to 35 | V | |
| Output IC Power Dissipation (PO) | 800 | mW | |
| Total Power Dissipation (PT) | 850 | mW | |
| Recommended Operating Supply Voltage (VCC - VEE) | 15 to 30 | V | |
| Recommended Input Current (ON) | 10 to 16 | mA | |
| Recommended Input Voltage (OFF) | -3.6 to 0.8 | V | |
| High Level Output Current (IOH) | 1.0 to 4.0 | A | VO = VCC - 4 or VCC - 15 |
| Low Level Output Current (IOL) | 1.0 to 4.0 | A | VO = VEE + 2.5 or VEE + 15 |
| High Level Output Voltage (VOH) | VCC-4 to VCC-3 | V | IO = -100 mA |
| Low Level Output Voltage (VOL) | 0.1 to 0.5 | V | IO = 100 mA |
| Propagation Delay Time to High Output Level (tPLH) | 0.10 to 0.50 | s | |
| Propagation Delay Time to Low Output Level (tPHL) | 0.10 to 0.50 | s | |
| Pulse Width Distortion (PWD) | 0.30 | s | |
| Rise Time (tr) | 0.1 | s | |
| Fall Time (tf) | 0.1 | s | |
| UVLO to Turn On Delay (tUVLO,ON) | 0.8 | s | |
| UVLO to Turn Off Delay (tUVLO,OFF) | 0.6 | s | |
| Output High Level CMR (|CMH|) | 15 to 30 | kV/s | |
| Output Low Level CMR (|CML|) | 15 to 30 | kV/s | |
| Input-Output Momentary Withstand Voltage (VISO) | 5000 | VRMS | t = 1 min. |
| Input-Output Resistance (RI-O) | 1012 to 1013 | | VI-O = 500 VDC, TA = 25C |
| Input-Output Capacitance (CI-O) | 0.5 to 0.6 | pF | f =1 MHz |
